Copper Deposit Exploration: From Programme to Report

Exploration of copper deposits in Kazakhstan often does not start from scratch. Many projects already hold data from earlier campaigns: reports, sections, drill logs and assay results. The task of exploration is to establish how reliably these data describe the mineralisation and to test its boundaries where the next decision depends on them. The fieldwork programme is therefore linked to the expected outcome from the outset: which questions exploration must answer and in what form the client will receive the answers.

Objectives on a copper project

Copper deposits in Kazakhstan belong to different deposit types and mineralisation styles — porphyry, volcanogenic massive sulphide and sediment-hosted stratiform copper. The type controls orebody shape and metal distribution. Exploration of porphyry copper deposits targets large stockwork bodies with gradational boundaries: the ore outline is defined by a cut-off grade rather than a visible contact, so consistent drill spacing and continuous core sampling are required. Massive sulphide lenses and tabular deposits generally have sharper contacts.

Existing data help decide what to test first: flanks and deeper levels, areas of wide drill spacing, intervals with poor core recovery or unverified assays. Fieldwork then refines the geometry and distribution of mineralisation. On some copper deposits the vertical profile also matters: the oxide zone, the supergene enrichment zone and primary ore differ in mineralogy and metallurgical behaviour. In addition to total copper, copper speciation is therefore often determined, along with by-product metals — molybdenum, gold and silver — where present. The specific ore type and methods are tied to what is already known about the deposit.

Work programme and data verification

Copper exploration begins with a review of the input data. Historical reports, maps, sections, drill logs and sampling databases are brought into a single coordinate system and checked for internal consistency. On this basis, an exploration plan is prepared; under the Subsoil Code, this project document sets out the types, methods and techniques of work, with approximate volumes and timelines.

Observation points are selected to resolve the main uncertainties. Mapping locates structures and contacts, and drill holes are sited on sections across the mineralisation and where verification of historical data will be most effective. Diamond drill core is logged, photographed, placed in core trays and sampled at intervals that respect geological boundaries.

Data verification relies on QA/QC: certified reference materials and blanks in the sample stream, field duplicates, coarse-crush and pulp duplicates, internal laboratory checks and umpire assays at a second laboratory. Assays are performed by accredited laboratories. New data are also compared with historical data: poor agreement between closely spaced holes is a reason to reconsider which historical assays can be used in the model.

Results and reporting

The field result is a verified database: drill-hole documentation, assay results and quality control. Interpretation is built on it: geological sections, a three-dimensional orebody model and refined mineralisation boundaries. The model is needed to plan the next drilling phase, estimate Mineral Resources and move on to design decisions.

Reporting under the KAZRC Code is a separate stage. If the scope includes it, this is built into the programme from the start, as it determines requirements for drill spacing, documentation and QA/QC, and the report is signed by a Competent Person. Mineral Resource estimation and such reporting are carried out as part of technical consulting services.

Experience at the Aktogay mining and processing complex

Within the territory of the Aktogay mining and processing complex, Minerals Operating prepared an exploration plan and a report on exploration results under the KAZRC Code.

What to prepare before discussing the programme

The task is easier to assess with the following to hand:

  • location and outline of the area, and the type of subsoil use right;
  • geological maps and sections;
  • reports from earlier campaigns;
  • drill-hole and trench logs;
  • sampling results, if available, with the laboratory and analytical methods.

If a separate drilling contract is needed, see drilling operations.

Where to start

A brief description of the deposit and the task is a good starting point. Where data are available, state the district, the stage of work, the mineralisation type and the materials on hand. These determine which historical data can be used, what needs to be tested in the field and what the programme will include. More information is available on the exploration page.

Any questions?
Do you want to order a service or get a consultation?
Submit the form and we will contact you as soon as possible.