An error of just a few percentage points in grade can result in resource estimates being off by tens of millions of dollars. This is precisely why the Quality Assurance and Quality Control (QA/QC) system in drilling and sampling has become a mandatory standard for any serious exploration project.
Get a consultationInvestors demand not just figures — they need proof of data reliability. International standards KAZRC, JORC, and NI 43-101 explicitly state: without a documented QA/QC system, exploration data cannot be considered credible. A project without quality control simply will not secure funding.
Minerals Operating has implemented a comprehensive QA/QC system covering the entire cycle — from core extraction to final analytical results. An exploration project's reputation is built on data transparency and reproducibility.
Every metre of core is documented upon extraction: depth, lithology, and mineralisation signs are recorded. Core is photographed with colour scales and depth markers. Any core loss or shear zones are immediately noted in field logs. Sampling follows an approved methodology with consistent intervals.
Minerals Operating inserts certified reference materials (CRMs) of three concentration levels into every sample batch. If the laboratory determines content with deviation exceeding 10% from the certified value, the entire batch is sent for re-analysis. This ensures analytical equipment functions correctly.
Field duplicates are taken from archived core halves and submitted as separate samples. Result comparison reveals material homogeneity.
Laboratory duplicates are prepared from a single pulverised sample. Result discrepancies signal analytical problems.
Coarse duplicates are taken during crushing, identifying macro-level heterogeneity — such as coarse native gold grains.
Blank samples of demonstrably barren material (quartz, barite) are inserted at a frequency of no less than 1 per 20 samples. Detecting significant content in a blank indicates contamination during core sawing, crushing, or in the laboratory. Particularly critical when working with high-grade ores.
All equipment — from scales to drilling rigs — undergoes regular verification. Minerals Operating maintains calibration logs recording dates, results, and standards used.
International practice requires analysing 5–10% of samples at an independent laboratory (check assay). Samples are randomly selected from the entire dataset.
Minerals Operating contracts with accredited laboratories (ISO/IEC 17025), specifying analytical methods, detection limits, turnaround times, result formats, and re-analysis procedures. For critically important projects, a "two plus one" scheme is employed: primary, backup, and arbitration laboratories.
Each sample is accompanied by a preparation protocol: crushing method, pulverising method, sample weight, analytical method. For gold, the standard is fire assay; for base metals, ICP-MS or ICP-AES.
Minerals Operating maintains complete documentation:
These materials are reviewed by a Competent Person signing the final resource report. Without convincing quality demonstration, the report will not pass scrutiny.
Standard deviations — re-analysis of entire batches processed on the day of failure.
High duplicate variability — increased sample weights or finer pulverising.
Blank contamination — identifying the contamination source (usually crushing equipment), cleaning, re-analysing affected samples.
Minerals Operating applies a clear algorithm: isolating problematic batches, root cause analysis, re-analysis, documentation, procedure adjustment.
The QA/QC system is not procedures but a culture of quality at Minerals Operating. Data reliability is the company's reputation and project success.
Investors choose contractors they can trust. Minerals Operating proves this trust with documents: control charts, statistical reports, traceability of every sample from borehole to result. This approach enables our clients to confidently present projects on international exchanges and attract financing from major investment funds.